small olive,hemp seed nut oil press machine with CE/ISO flowchart:
Oilseeds → cleaning → softening → flaking → extrusion → drying → to extraction workshop→DTDC →first and second evaporation →stripping tower →condenser →solvent
recovery
small olive,hemp seed nut oil press machine with CE/ISO brief introduction:
a. cleaning device for soybean Oil Plant:remove the raw material soybean in various impurities, such as: iron,
stones, clump, such as the plant leaf, clean up till impurity content does not exceed 0.2%.
b.crushing machine for Soybean Oil Plant: soybean is crushed into 6-8 pieces. In order to meet the requirements
of crushing, the soybean is suitable for crushing with the moisture of 7% to 12%.
c. Softening process for Soybean Oil Plant:the purpose of softening is to adjust the moisture and temperature of oil, and make it soft.
d.flaking process for Soybean Oil Plant: rolling raw material into flakes, and the purpose is to increae surface
area, destroy the soybean cell tissue, shorten the way of oil out from cake.
e:Extrusion for Soybean Oil Plant:through high temperature and high pressure, soybean flakes are transfered into expanded pellet, which is easy to extract oil from, and keep high nutritive value.
small olive,hemp seed nut oil press machine with CE/ISO Extraction process:
1. Solvent pumps for small olive,hemp seed nut oil press machine with CE/ISO: continuously spray solvent to the rotary-type extractor
2. Roary extractor: Spray and soak the pre-pressed cake with solvent so that oil fats can be diss-olved in solvent(form miscella). After processing, you can get wet meal and miscella (mixed oil).
3. DTDC for small olive,hemp seed nut oil press machine with CE/ISO: usd to separate the solvent from the wet meal.
4. Miscella tank 1st evaporation for small olive,hemp seed nut oil press machine with CE/ISO: pump the miscella (oil with solvent) in to the miscella 1st , then add
saline water to it. The phospholipid in the miscella will react with the saline water, at last the reactant
precipitate, reaching the goal of purifying.
5. Miscella tank 2nd evaporation for small olive,hemp seed nut oil press machine with CE/ISO: the purified miscella will be pumped into it, and use high temperature steam to let solvent evaporate out.
6. Miscella stripping for small olive,hemp seed nut oil press machine with CE/ISO: it will remove the remaining solvent in miscella. And the solvent will be discharged to condenser for recycling.
7. Condensers for small olive,hemp seed nut oil press machine with CE/ISO: to cooling the solvent gas separated from the wet meal and miscella for recycling.
small olive,hemp seed nut oil press machine with CE/ISO
small,sesame,peanut, sunflower seeds oil press machine
1,Produce healthy & delicious cooking oil
2,Capacity:20-2000TPD
3,professional oil makineg machine
product description
oil mill can process soybean , rapeseed , corn germ , peanut , cottonseed , sunflower , rapeseed , rice bran , castor seed , palm and copra ,etc.
Basic part catalogues of Oil Mill Machinery
Item |
Equipment Name |
Model |
Capacity(T/D) |
Power (kw) |
Pretreatment and prepressing equipment |
Bucket Elevator |
DTG series |
50-2400 |
2.2-3.0 |
Sprial Conveyor |
LSS series |
50-1000 |
2.2-1.1 |
|
Chain Dryer |
BH series |
50-1000 |
4-11 |
|
Softening Pot |
RHL series |
50-1000 |
15-110 |
|
Cooker |
ZCL series |
50-1000 |
15-110 |
|
Oil extraction equipment |
Chain Extractor |
TXJ series |
500-4000 |
7.5-22 |
Loop Extractor |
YHJ series |
2000-6000 |
15-37 |
|
Rotocel Extractor |
GJP series |
50-2000 |
1.5-111 |
|
Desovlentizer-toaster |
DTDC series |
50-2000 |
15-110 |
|
Mixed oil evaporator |
ZF series |
50-2000 |
|
|
Layer steam-stripping tower |
QTD series |
50-2000 |
|
|
Paraffin adsorb system |
YXS series |
50-2000 |
|
|
Water bath type device for exhaust gas recovery |
XSZZ series |
50-2000 |
|
|
Oil Refining Equipment |
Vacuum Dryera |
BMTST series |
50-1000 |
|
Desolventizing Tower |
RZG/BMTRT series |
50-1000 |
|
|
Novel Decolorizing Tower |
LYZ series |
50-1000 |
|
|
Disc Deodorization Tower |
TCT series |
50-1000 |
|
|
Filler Type Deodorization Tower |
TLT series |
50-1000 |
|
|
Cryatallization Tank |
YJG series |
50-1000 |
|
|
Decolorization Pot |
TSG series |
3-20 |
|
|
Deodorization Pot |
TCG series |
3-20 |
|
|
Auxiliary Machine |
Tube Heat Exchanger |
LN series |
|
|
Sprial Board Heat Exchanger |
16 series |
|
|
|
Tower Type Condenser |
TLN series |
|
|
Featured characteristics of Oil Mill Machinery :
1,Multiple oil extractor selections assure the highest oil yield. LD provides rotary extractor, loop extractor and towline extractor, ensuring the most efficient oil extracting on basis of particularity of every oilseed. The organic solvent addition through soaking or spraying will extract crude oil from oilseeds efficiently. Extraction system is highly adaptable to different raw materials.
2,High quality crude oil available. Equipped with negative pressure evaporator and exhaust gas absorption system, the process line of oilseed extraction oil can extract high purity oil with low energy consumption, low residual oil rate in meal, high oil yield, low cost and environmental production etc.
3,Turnkey project with reliable service. LD owns rich experience in design, manufacturing, and installation of production line of oilseed extraction machine. With more than 10 constructed turnkey projects, we can provide the most reliable and matures oil extraction line and service to customers worldwide.
our services
Service:
1) Pre-sale service: Freely provide project designing, process designing, choosing suitable equipment for you.
2) Medium-sales service: Accompany you to complete the acceptance of the equipment,draft the construction scheme and detailed process, and complete process of export
3) After-sales service: We sent engineer to the scene to guide installation, debugging and training operators.
company information
Customer visit
Looing forward for your enquiry! Welcome to our factory!!!
Shandong Leader Machinery Co.,Ltd. value "honesty, innovative and quality" because Shandong Leader Machinery Co.,Ltd. know that Shandong Leader Machinery Co.,Ltd. are not only supplying equipment to our clients but the partners to help our clients to get a better result.Keeping this in our mind,Shandong Leader Machinery Co.,Ltd. not only make high quality food processing equipment, but also help the clients to figure out the optimum processing work flows,make amendments according to client's specific needs,training staffs for the user of our equipment and even more, because Shandong Leader Machinery Co.,Ltd. believe that our users or clients' success is the foundation of ours.
Shandong Leader Machinery Co.,Ltd. is one of the leading manufacturers and Suppliers of small olive,hemp seed nut oil press machine with CE/ISO.Shandong Leader Machinery Co.,Ltd. manufacture small olive,hemp seed nut oil press machine with CE/ISO making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Soybean Oil Plant for you reference,such as small olive,hemp seed nut oil press machine with CE/ISO ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Soybean Oil Plant.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:[email protected],Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for small olive,hemp seed nut oil press machine with CE/ISO, inform us raw material you want to use for small olive,hemp seed nut oil press machine with CE/ISO,and specific requirements for small olive,hemp seed nut oil press machine with CE/ISO.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Soybean Oil Plant.