2015 New Type palm oil processing machine With CW/ISO/SGS flowchart:
Oilseeds → cleaning → softening → flaking → extrusion → drying → to extraction workshop→DTDC →first and second evaporation →stripping tower →condenser →solvent
2015 New Type palm oil processing machine With CW/ISO/SGS brief introduction:
a. cleaning device for soybean Oil Plant:remove the raw material soybean in various impurities, such as: iron,
stones, clump, such as the plant leaf, clean up till impurity content does not exceed 0.2%.
b.crushing machine for Soybean Oil Plant: soybean is crushed into 6-8 pieces. In order to meet the requirements
of crushing, the soybean is suitable for crushing with the moisture of 7% to 12%.
c. Softening process for Soybean Oil Plant:the purpose of softening is to adjust the moisture and temperature of oil, and make it soft.
d.flaking process for Soybean Oil Plant: rolling raw material into flakes, and the purpose is to increae surface
area, destroy the soybean cell tissue, shorten the way of oil out from cake.
e:Extrusion for Soybean Oil Plant:through high temperature and high pressure, soybean flakes are transfered into expanded pellet, which is easy to extract oil from, and keep high nutritive value.
2015 New Type palm oil processing machine With CW/ISO/SGS Extraction process:
1. Solvent pumps for 2015 New Type palm oil processing machine With CW/ISO/SGS: continuously spray solvent to the rotary-type extractor
2. Roary extractor: Spray and soak the pre-pressed cake with solvent so that oil fats can be diss-olved in solvent(form miscella). After processing, you can get wet meal and miscella (mixed oil).
3. DTDC for 2015 New Type palm oil processing machine With CW/ISO/SGS: usd to separate the solvent from the wet meal.
4. Miscella tank 1st evaporation for 2015 New Type palm oil processing machine With CW/ISO/SGS: pump the miscella (oil with solvent) in to the miscella 1st , then add
saline water to it. The phospholipid in the miscella will react with the saline water, at last the reactant
precipitate, reaching the goal of purifying.
5. Miscella tank 2nd evaporation for 2015 New Type palm oil processing machine With CW/ISO/SGS: the purified miscella will be pumped into it, and use high temperature steam to let solvent evaporate out.
6. Miscella stripping for 2015 New Type palm oil processing machine With CW/ISO/SGS: it will remove the remaining solvent in miscella. And the solvent will be discharged to condenser for recycling.
7. Condensers for 2015 New Type palm oil processing machine With CW/ISO/SGS: to cooling the solvent gas separated from the wet meal and miscella for recycling.
LD Machine Palm Oil Processing Machine
LD Food & Oil Machinery designs oil pressing machine production line to achieve crude palm oil from palm fruits and bunches. This type of self-sufficient palm oil making process adopts mature and reasonable design, assuring high capacity of crude palm oil, low energy consumption, low cost and low environmental pollution.
Palm Fruit Oil Pressing Machine
Type: palm fruit/bench oil pressing, making machines
Processing machines: palm fruits, palm bunches
Equipment: sterilizer, elevator, vibration, screwing pressing machine, boiler
Application: palm fruit (FFB) and palm bunches
Palm fruit oil pressing production line introduction:
The Fresh Fruit Bunches(FFB) is available after 3 yeas plantation. Palm fruits are sent into crude palm oil processing plant with following production process:
- Weighing. Transport palm fruit to factory after truck weighing so as to make prompt settlement and production cost subsequent.
- Unloading fruit.Fresh Fruit Bunches (FFB) are sent to fermentation tank through transportation machinery after sieving and impurities removing. The time from picking up to fermentation should be less than 24 hours, or the free fatty acid(FFA) will rise, which will not be conductive for further processing and production of palm oil from palm oil making machine.
- Fermentation. FFB will pass high pressure and high temperature sterilization after entering fermentation tank. It will soft and make sterilization for FFB.
- Threshing. Threshing machine will separate both palm fruits and empty fruit bunches(EFB) after FFB soften duirng fermentation.
- Empty fruit bunches (EFB). EFB are sent to send to garden as fertilizer, fuel or other purposes after conveying and hoarding.
- Meshing. Mixing tank will mesh and crush palm fruit until broken after fruit threshing.
- Pressing. The crushed palm fruit will be leaching out from screw extrusion of palm oil pressing machine.
- Fiber separation. The extrued fiber pie enters air separation system after crushed to get separation of fibers and cores.
- Separation. Crusher divided fruit core into palm kernel and shell after separated with fiber. Air separation and washing systems separate palm kernels and shells. Shells enters boiler system as fuel, and palm kernels are storage after drying.
- Oil clarification. Crude palm oil (CPO) contains moisture and impurities after palm oil pressing. CPO begins primary treatment through sand tank and screen, enters vertial clarification tank to make heating and stirring, and finally separate into waste oil and edible vegetable oil. Edible vegetable oil is sent to crude oil storage tank after drying. Waste oil will be retreatment and recovery after desanding and centrifugation.
- Oil transportation. Oil pipeline transportation will be projected on basis of present situation.
- Water treatment. Water source is introduced into plant from river nearby. It will achieve boil feed water standard after primary clarification and filtration, secondary osmosis and reverse osmosis treatment.
- Power system. Steam turb generator power generation is the main driving force. It is also equipped with diesel generator sets.
Process flow chart of palm oil making machines production line:
Features of palm oil making machines:
- Low environment pollution palm oil milling production line. This palm fruit oil machine adopts process of sterilization, threshing, digesting, pressing, clarification, purification, drying, depericarper, crushing and final pressing. This mature design fulfills the lowest fuel consumption, steam driving, and self-sufficient energy supplying.
- Quality and performance reliable and stable oil making process. The design, manufacturing, and installation are all CE and ISO quality approval. LD Food &Oil Machinery owns rich experience in palm oil making machine designs more than 60 years and gets national patent certificates of multiple oil milling production lines.
Jinan LD Food & Oil Machinery Engineering Co., Ltd. (short for HHFOME) is a manufacturing enterprise specialized in producing oil machinery in China. HHFOME consists of Jinan Huaxian Grain Machine Factory, Huaxian Hangpeng Grain Machinery Co., Ltd. and Beijing Huakang Xiwang Biological Technology Co., Ltd.. Established in 1988, HHFOME covers an area of 63,000 square meters and has 210 senior engineering technicians. Our company has 202 sets of automatic processing equipment. Processing capacity of our enterprise is more than 3000 sets every year.
HHFOME has obtained independent export rights and has passed the evaluation of ISO9001:2000 Quality System Management Certification. We have got 22 national patents, 4 international awards, 2 national awards and 2 provincial awards.
Our products include copra oil pressing equipment, rice bran oil manufacturing equipment, lignite wax extraction equipment, cottonseed preprocessing equipment and other machinery of oil making field, with 5 series and over 80 kinds.
Our Main Products:
Sets of equipment for rice bran oil making, set of equipment for palm oil fractionation, sets of equipment for cottonseed protein dephenolization, biodiesel continuous production equipment, large scale high-class cooking oil equipment, Class A oil refining equipment, JC-plate extraction equipment and oil filters
Shandong Leader Machinery Co.,Ltd. value "honesty, innovative and quality" because Shandong Leader Machinery Co.,Ltd. know that Shandong Leader Machinery Co.,Ltd. are not only supplying equipment to our clients but the partners to help our clients to get a better result.Keeping this in our mind,Shandong Leader Machinery Co.,Ltd. not only make high quality food processing equipment, but also help the clients to figure out the optimum processing work flows,make amendments according to client's specific needs,training staffs for the user of our equipment and even more, because Shandong Leader Machinery Co.,Ltd. believe that our users or clients' success is the foundation of ours.
Shandong Leader Machinery Co.,Ltd. is one of the leading manufacturers and Suppliers of 2015 New Type palm oil processing machine With CW/ISO/SGS.Shandong Leader Machinery Co.,Ltd. manufacture 2015 New Type palm oil processing machine With CW/ISO/SGS making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Soybean Oil Plant for you reference,such as 2015 New Type palm oil processing machine With CW/ISO/SGS ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Soybean Oil Plant.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:email@example.com,Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for 2015 New Type palm oil processing machine With CW/ISO/SGS, inform us raw material you want to use for 2015 New Type palm oil processing machine With CW/ISO/SGS,and specific requirements for 2015 New Type palm oil processing machine With CW/ISO/SGS.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Soybean Oil Plant.