Product Details

castoroil biodiesel production line

Place of Origin Shandong,China (Mainland)
Brand Name Soybean Oil Plant
Min.Order Quantity 1 Set/Sets
Price US $150,000 - 3,000,000/ Set
Payment Terms paypal,UnionPay, Visa/MasterCard, Amex, Discover,T/T
Supply Ability 20 Set/Sets per Month

Product Features

castoroil biodiesel production line flowchart:
Oilseeds → cleaning → softening → flaking → extrusion → drying → to extraction workshop→DTDC →first and second evaporation →stripping tower →condenser →solvent
recovery

castoroil biodiesel production line brief introduction:
a. cleaning device for soybean Oil Plant:remove the raw material soybean in various impurities, such as: iron,
stones, clump, such as the plant leaf, clean up till impurity content does not exceed 0.2%.
b.crushing machine for Soybean Oil Plant: soybean is crushed into 6-8 pieces. In order to meet the requirements
of crushing, the soybean is suitable for crushing with the moisture of 7% to 12%.
c. Softening process for Soybean Oil Plant:the purpose of softening is to adjust the moisture and temperature of oil, and make it soft.
d.flaking process for Soybean Oil Plant: rolling raw material into flakes, and the purpose is to increae surface
area, destroy the soybean cell tissue, shorten the way of oil out from cake.
e:Extrusion for Soybean Oil Plant:through high temperature and high pressure, soybean flakes are transfered into expanded pellet, which is easy to extract oil from, and keep high nutritive value.
castoroil biodiesel production line Extraction process:
1. Solvent pumps for castoroil biodiesel production line: continuously spray solvent to the rotary-type extractor
2. Roary extractor: Spray and soak the pre-pressed cake with solvent so that oil fats can be diss-olved in solvent(form miscella). After processing, you can get wet meal and miscella (mixed oil).
3. DTDC for castoroil biodiesel production line: usd to separate the solvent from the wet meal.
4. Miscella tank 1st evaporation for castoroil biodiesel production line: pump the miscella (oil with solvent) in to the miscella 1st , then add
saline water to it. The phospholipid in the miscella will react with the saline water, at last the reactant
precipitate, reaching the goal of purifying.
5. Miscella tank 2nd evaporation for castoroil biodiesel production line: the purified miscella will be pumped into it, and use high temperature steam to let solvent evaporate out.
6. Miscella stripping for castoroil biodiesel production line: it will remove the remaining solvent in miscella. And the solvent will be discharged to condenser for recycling.
7. Condensers for castoroil biodiesel production line: to cooling the solvent gas separated from the wet meal and miscella for recycling.

Castoroil biodiesel production line

Biodiesel is used for chemical industry field, it makes bio-oil into biodiesel. Bio-oil can be plant oil,animal oil or high acid value waste oil.

The set of biodiesel equipment contains the international advanced pre-processing section,esterification process and distillation process,and it meets the European Union Standards.We have obtained patent,and patent No. is ZL200920089138.8.The production stepsare as follows:

1.Preprocessing section of bio-oil: when heated to 65~70°c,bio-oil is leached to remove impurities.

2.Drying section:bio-oil without impurities is dehydrated and dried

3.First esterification reaction:adding bio-oil dehydrated to methanol including 3% sulfuric acid,first esterification reaction starts,and it will take 1.5~2.5 hours.

4.Second esterification reaction:this esterification reaction will take 9~12 hours.

5.Vacuum drying section: Second esterification reactants are dried with vacuum,removing moisture,reducing water content below 3%.

6.Distillation section: with vacuum state,section esterification reactants after vacuum drying section are heated to 220°c,biodiesel forms by steaming.Then cooling biodiesel to be liquid ,the liquid biodiesel is just finished biodiesel.

7.Methanol fine-distillation:after biodiesel is isolated,the remaining methanol liquid is distilled to form methanol.Cooled methanol can be reused.

Equipment advantages:

1.Stable process performance

2.Simple operation

3.Small investment of equipment

4.High conversion rate(up to 85%)

Animal&vegetable oil and acid oil can be used to make biodiesel.Biodiesel is novel green fuel,there are following featurers:

1.Good driving performance for low-temperature motor,cooling point can reach -10°c without adding agent

2.Good lubrication performance ensures low wearing rate of oil spraying pump,engine tank and rods

3.As flash point of biodiesel is higher than mineral diesel,biodiesel does not belong to dangerous goods.

4.Sulfur content is low,small emission

5.low residual combustion char(0.02%),i.e. microparticles content of waste gags is low.

6.Damage of waste gas after combustion is lower than that of mineral diesel

7.High biodecomposition rate is favorable for environment protection.

Shandong Leader Machinery Co.,Ltd. value "honesty, innovative and quality" because Shandong Leader Machinery Co.,Ltd. know that Shandong Leader Machinery Co.,Ltd. are not only supplying equipment to our clients but the partners to help our clients to get a better result.Keeping this in our mind,Shandong Leader Machinery Co.,Ltd. not only make high quality food processing equipment, but also help the clients to figure out the optimum processing work flows,make amendments according to client's specific needs,training staffs for the user of our equipment and even more, because Shandong Leader Machinery Co.,Ltd. believe that our users or clients' success is the foundation of ours.

Shandong Leader Machinery Co.,Ltd. is one of the leading manufacturers and Suppliers of castoroil biodiesel production line.Shandong Leader Machinery Co.,Ltd. manufacture castoroil biodiesel production line making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Soybean Oil Plant for you reference,such as castoroil biodiesel production line ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Soybean Oil Plant.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:sales2@ldfoodmachine.com,Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for castoroil biodiesel production line, inform us raw material you want to use for castoroil biodiesel production line,and specific requirements for castoroil biodiesel production line.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Soybean Oil Plant.

Skype Contact Now