Jinan LD Manufacture Corn Oil Refining Plant flowchart:
Oilseeds → cleaning → softening → flaking → extrusion → drying → to extraction workshop→DTDC →first and second evaporation →stripping tower →condenser →solvent
Jinan LD Manufacture Corn Oil Refining Plant brief introduction:
a. cleaning device for soybean Oil Plant:remove the raw material soybean in various impurities, such as: iron,
stones, clump, such as the plant leaf, clean up till impurity content does not exceed 0.2%.
b.crushing machine for Soybean Oil Plant: soybean is crushed into 6-8 pieces. In order to meet the requirements
of crushing, the soybean is suitable for crushing with the moisture of 7% to 12%.
c. Softening process for Soybean Oil Plant:the purpose of softening is to adjust the moisture and temperature of oil, and make it soft.
d.flaking process for Soybean Oil Plant: rolling raw material into flakes, and the purpose is to increae surface
area, destroy the soybean cell tissue, shorten the way of oil out from cake.
e:Extrusion for Soybean Oil Plant:through high temperature and high pressure, soybean flakes are transfered into expanded pellet, which is easy to extract oil from, and keep high nutritive value.
Jinan LD Manufacture Corn Oil Refining Plant Extraction process:
1. Solvent pumps for Jinan LD Manufacture Corn Oil Refining Plant: continuously spray solvent to the rotary-type extractor
2. Roary extractor: Spray and soak the pre-pressed cake with solvent so that oil fats can be diss-olved in solvent(form miscella). After processing, you can get wet meal and miscella (mixed oil).
3. DTDC for Jinan LD Manufacture Corn Oil Refining Plant: usd to separate the solvent from the wet meal.
4. Miscella tank 1st evaporation for Jinan LD Manufacture Corn Oil Refining Plant: pump the miscella (oil with solvent) in to the miscella 1st , then add
saline water to it. The phospholipid in the miscella will react with the saline water, at last the reactant
precipitate, reaching the goal of purifying.
5. Miscella tank 2nd evaporation for Jinan LD Manufacture Corn Oil Refining Plant: the purified miscella will be pumped into it, and use high temperature steam to let solvent evaporate out.
6. Miscella stripping for Jinan LD Manufacture Corn Oil Refining Plant: it will remove the remaining solvent in miscella. And the solvent will be discharged to condenser for recycling.
7. Condensers for Jinan LD Manufacture Corn Oil Refining Plant: to cooling the solvent gas separated from the wet meal and miscella for recycling.
Jinan LD Manufacture Corn Oil Refining Plant
Processing Capacity: 10TPD-1000TPD
1. corn germ Extraction machine
1.1 THE CORN WET MILLING PROCESS
Shelled corn enters the system through cleaning machines,which remove foreign material. Cleaned corn then goes to a
steep tank holding up to 25,000 bushels, where it soaks in circulating water, maintained at 125 and slightly acidified with 0.1 to 0.2 percent of sulfur dioxide. Steeping the corn for 24 to 48 hours softens the kernel, loosens the hull and germ and swells the endosperm. Steeping takes place in a series of tanks, which are operated in a continuous batch process.
The water circulates counter currently through the tanks, so when it is finally with drawn from the newest batch,
ithas a relatively high concentration of soluble. The steeping process facilitates separation of the components of the kerneland loosens the gluten bonds to release the starch. Discharged steep water, rich in protein at 35 to 45 percent of total solids, is concentrated in vacuum evaporators to a solids content of 35 to 55 percent. Steep water concentrate is utilized in feed products or in industrial fermentation media.
Softened corn from the steep tanks is coarsely ground with water in an attrition mill to free the hull, the germ and a large portion of the floury endosperm starch and gluten. The slurry of coarsely ground corn is forced under pressure into hydro cyclone, which centrifugally separate the lighter corn germ, which is then carried off to washing screens. Washed germ is conveyed to a dryer and from there to oil recovery facilities. Washings from the germ are piped to the starch centrifuges. Heavy fractions from the coarse grinding mills and germ separators are passed through fine grinding mills and washing screens
for fiber separation. Finally, the slurry is sent to centrifuges for separation of gluten (light phase) from starch (heavy phase).
The gluten fraction passes to a centrifugal concentrator and is filtered and dried. The starch stream goes to washing cyclones fed with fresh water; overflow, containing residual gluten from the Â¡Â°mill starch, is recycled to the starch centrifuge; underflow from the washing cyclones, a suspension of starch containing only about 0.3 percent protein, is passed through a
concentrator and dryer, from which the finished starch product emerges.
2. Corn Germ Oil Pressing and Refining Process
natural antioxidants it contains, undergoes little deterioration when stored for long periods, provided the temperature is kept well below 40 degree and moisture plus volatile matter level is below 0.4 percent. Since virtually all refined corn oil is utilized in foods, the need to attain a quality suited to such use guides the refining process. Steps include degum- alkali treatment to neutralize free fatty acids, bleaching for color and trace element removal, winterization (the removal of high melting waxes)and deodorization (steam use 3 is a flow chart of the enters the process via preliminary filtration.
2.1 Corn Germ Oil Refining Process
Degumming removes phosphatides and other materials that may be precipitated or dissolved from the crude oil by hot water. This step is usually omitted in refineries that process only corn oil, but is used in refineries that are set up to refine soybean oil as well as corn oil. Degumming is accomplished by introducing hot water at a level of 1 to 3 percent of oil volume, or by injecting an equivalent amount of steam to hydrate the phosphatides. The phosphatides, together with certain other materials, absorb water and precipitate from the oil as a heavier phase, which is removed by centrifugation.
When degumming is omitted, the refiner depends on an alkali refining step, which uses roughly the same temperature as a degumming operation, to take out the phosphatides along with the free fatty acids (in the form of soapstock) and to reduce color. Phospholipids, corn lecithin, can be recovered from both degumming and alkali refining residues.
In the alkali refining step, free fatty acids are neutralized by treatment at 82- 100 degree with a small amount of concentrated sodium hydroxide solution. Alkali refining reduces color and also removes other nontriglyceride substances, which are separated along with the neutralized free fatty acids and hydrated phosphatides, by centrifugation. The alkali treated oil is usually washed with a small quantity of hot water to remove residual soap formed by the alkali treatment. The separated residues from alkali treatment are sold as soapstock or acidulated soapstock, which contains about 95 percent free fatty acids.
Bleaching The oil is then decolorized by treatment with acidactivated clays that bleach by adsorbing color bodies, residual soaps and metal complexes from the oil. In plants producing partially hydrogenated oil along with regular corn oil, bleached oil coming from the filter is piped to the hydrogenation vessel. When that process is completed, the partially hydrogenated oil is passed through a filter to remove catalyst particles and other extraneous material. Further bleaching, deodorization and filtration yield a clear, pale yellow oil.
Refining of the unmodified oil continues with winterization. Waxes, present in the oil in small amounts characteristically have high melting points and are readily crystallized by chilling in refrigerated vessels. They are then removed by filtration. This produces a haze-free finished oil when refrigerated.
Finally, deodorization is accomplished by a continuous steam distillation under high vacuum at high temperature 232-260 degree Oil is fed into the top of the distillation tower, while a jet of steam entering at the base carries the volatile odorants with it as it passes upwards and exits near the top. Condensed exhaust steam contains odor, color, flavor components and the remaining traces of free fatty acids. The deodorized oil is drawn off at the bottom of the tower, then dried and passed through a polish filter to become the final product, refined corn oil.
3. Final Corn Oil Package
4 Company Indroduction
If you want to know more information, please send E-mail to us E-mail: sales09(at)oilmachineworld.com Skype: LD-sales09 Mobile: 0086-18203651296 ( viber & whatsapp)
Shandong Leader Machinery Co.,Ltd. value "honesty, innovative and quality" because Shandong Leader Machinery Co.,Ltd. know that Shandong Leader Machinery Co.,Ltd. are not only supplying equipment to our clients but the partners to help our clients to get a better result.Keeping this in our mind,Shandong Leader Machinery Co.,Ltd. not only make high quality food processing equipment, but also help the clients to figure out the optimum processing work flows,make amendments according to client's specific needs,training staffs for the user of our equipment and even more, because Shandong Leader Machinery Co.,Ltd. believe that our users or clients' success is the foundation of ours.
Shandong Leader Machinery Co.,Ltd. is one of the leading manufacturers and Suppliers of Jinan LD Manufacture Corn Oil Refining Plant.Shandong Leader Machinery Co.,Ltd. manufacture Jinan LD Manufacture Corn Oil Refining Plant making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Soybean Oil Plant for you reference,such as Jinan LD Manufacture Corn Oil Refining Plant ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Soybean Oil Plant.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:email@example.com,Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for Jinan LD Manufacture Corn Oil Refining Plant, inform us raw material you want to use for Jinan LD Manufacture Corn Oil Refining Plant,and specific requirements for Jinan LD Manufacture Corn Oil Refining Plant.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Soybean Oil Plant.