Introduction of Shandong Leader Machinery Co.,Ltd. Crude Oil Refining Machine
1>. Palm oil mill have main ten parts:Reception Station,Sterilizer,Threshing,Press,Clarification, Kernel Recover, power station, boiler station, water treatment plant, oil storage tank.
2>. Shandong Leader Machinery Co.,Ltd. use the Fresh Fruit Bunch, because the palm fruit rancidity is very fast, if the rancidity will be influence the palm crude oil acid value, if the acid value is very high, the refining eCrude Oil Refining Machineiciency will drop.
3>. Generally speaking, The palm fruit processing plant is best away from the palm orchard.
Turn-key groundnut oil manufacturing process
Our main business:
ÃÂ¢ÃÂÃÂ¢ 10-500T/H oil material first cleaning,drying and storage section turn-key project.
ÃÂ¢ÃÂÃÂ¢ 100-3000 T/D oil pretreatment, shelling and pre-press workshop turnkey project (soybean hot peeling, bean skin crushing; the soybean extrusion, high oil contained pre-press cake extrusion, and high oil contained embryos puffed; of direct puffed). Rice bran production line turn-key project.
ÃÂ¢ÃÂÃÂ¢ Leaching workshop turnkey project (Towline extractor, Rotocel extractor, loop type extractor, DTDC separated machine, the full negative pressure evaporation, paraffin wax recovery, leaching workshop degum, phospholipid concentrate).
ÃÂ¢ÃÂÃÂ¢ 30-1000T/D oil continuous grade two or one physical (chemical) refining production line.
ÃÂ¢ÃÂÃÂ¢ 10-600T/D sunflower oil, rice bran oil, corn germ oil dewaxing turn-key project
ÃÂ¢ÃÂÃÂ¢ 10-200T/D Fatty acid esterification production cooking oil production line.
Groundnut oil manufacturing process
Raw materialÃÂ¢ÃÂÃÂCleaningÃÂ¢ÃÂÃÂ HullingÃÂ¢ÃÂÃÂ Separate Shell and KernelÃÂ¢ÃÂÃÂ SoftenÃÂ¢ÃÂÃÂFlakingÃÂ¢ÃÂÃÂCookingÃÂ¢ÃÂÃÂPressing
The main groundnut oil manufacturing process oil expeller:
In order to obtain high effective cleaning, ensure good work condition and production stability, high efficient
vibration screen was used in the process to separate big and small impurity. Suction type gravity stoner removing
machine was applied to remove the shoulder stone and earth, and magnetic separation equipment without power
and exhaust system were used to remove iron. Dust removing wind net is installed.
Put the raw material into the two discs.The relative movement between the two discs,the insection on the disc
surface make kneading function of the material hull,then make the hull fall down.Separate the shell and kernel.
Adjusting the moisture and temperature , so that increase the oilseed plasticity,reduce powder when flaking and
sticky roller, in order to ensure the quality of the flakes. conditioning can also reduce the vibration of the machine
when flaking roll wear, in order to facilitate the flaking operate normally.
Flaking means a certainty granularity of soy lamella was prepared for flaked of about 0.3 mm, the oil of raw material
can be extracted in the shortest time and maximum, and residual oil was less than 1%. the thickness is uniform,
moderate size, no out oil,less powder,and with a certain degree of mechanical strength.The fuel cell wall damaged,then shorten the oil discharged from the oil seed away.
Put the material into the toaster,the mixing blade is with continuous turning driven by the reducer.
The toaster is with interlayer design, heating media is hot conducting oil or steam, thus keep
the flaking temperature stable.
groundnut oil manufacturing process Pressing:
This is the oil out process, the soybean flake will be sent to oil press machine through the screw conveyor. After
pressing, we can get the crude cottoen oil.
Process features of our groundnut oil processing machine:
1 Full continuous and mechanized operation, and with electrical interlocking control system.
2. The equipment layout is in tower structure, and the material flow by relying on gravity to reduce reducing power consumption.
3. Take into consideration the environmental requirements in modern industry. The workshop is also equipped with the dedusting system with high performance, so as to meet the requirements of production and environmental protection.
4.When producing germ meal, the roller softening pot can better meet the flaking technical requirements.
5.Select scraper conveyor as much as possible, which can effectively reduce raw material crushing, improve solvent permeation into the material layer, and increase the extraction efficiency.
We have the good service and customers:
Reception Station for Crude Oil Refining Machine:
Used for loading palm fruit brunch from plantation,transport to sterilizer. Reception station adopt steel structure and concrete structure. Save equipment cost and construction cost.Have hydraulic control system, hydraulic door open/oCrude Oil Refining Machine automatic achieve continuous operation.Reduce operator, operate more easily and improve work eCrude Oil Refining Machineiciency.
Shandong Leader Machinery Co.,Ltd. is one of the leading manufacturers and Suppliers of Turn-key groundnut oil manufacturing process.Shandong Leader Machinery Co.,Ltd. manufacture Turn-key groundnut oil manufacturing process making machine using cutting-edge technology, Shandong Leader Machinery Co.,Ltd. have many kinds of Crude Oil Refining Machine for you reference,such as Turn-key groundnut oil manufacturing process ,Shandong Leader Machinery Co.,Ltd. can meet your different requirement in Crude Oil Refining Machine.Welcome to contact Shandong Leader Machinery Co.,Ltd.,contact name:Ms.Myra for a quotation
(Tel/whatsapp:0086-18363092712, Email:email@example.com,Skype:leaderfoodmachine2).Welcome to send us your enquiry about capacity for Turn-key groundnut oil manufacturing process, inform us raw material you want to use for Turn-key groundnut oil manufacturing process,and specific requirements for Turn-key groundnut oil manufacturing process.Shandong Leader Machinery Co.,Ltd. will provide you best solution for your project about Crude Oil Refining Machine.